Specification

LED 2VTL2R-2X2
ORDERING INFORMATION
Lead times will vary depending on options selected. Consult with your sales representative.
Example: 2VTL2R 33L ADP EZ1 LP835
Catalog
Number
Notes
Type
FEATURES & SPECIFICATIONS
INTENDED USE — The 2VTL2R LED Relight assembly is the ideal solution for renovating existing uorescent
troer and parabolic systems, delivering improved quality of light and refreshing the space. VTLR volumetric
lighting eliminates the “cave eect” by delivering the ideal amount of light to walls, work surfaces, and
people. The 2VTL2R Relight assembly is recommended for oces, schools, hospitals, and other general
lighting applications where existing 2x2 troer and parabolic uorescent xtures are currently in use.
CONSTRUCTION — Universal end brackets are constructed of 20-gauge powder-painted steel and are
secured to the host xture with provided tek screws. End brackets are painted black or white to match
existing parabolic or troer door frame reveals. The LED light engine is 20-gauge powder painted steel and
is wired to the supply voltage using a driver-disconnect plug system provided as standard. A steel wiring
connection cover is provided for use if required.
The door frame and reector assembly is vaulted cold-rolled steel with embossed facets and is painted after
fabrication. Impact-modied, single clear acrylic diuser provides excellent shielding and wide distribution.
OPTICS — Volumetric illumination is delivered by creating an optimal mix of light to walls, partitions, vertical
and horizontal work surfaces — rendering the interior space, objects and occupants in a more balanced,
complementary luminous environment. Linear faceted reector cavity softens and distributes light into
the space while minimizing luminous contrast between the xture and ceiling. Sloped end plates provide a
smooth, luminous transition between xture and ceiling while enhancing the perception of xture depth.
ELECTRICAL — Long-life LEDs, coupled with high-eciency drivers, provide superior quantity and quality
of illumination for extended service life. 90% LED lumen maintenance at 60,000 hours (L90/60,000).
eldoLED driver options deliver choice of dimming range and choices for control, while assuring icker-free,
low-current inrush, 89% eciency and low EMI.
Optional integrated nLight®controls make each luminaire addressable — allowing it to digitally communicate
with other nLight-enabled controls such as dimmers, switches, occupancy sensors and photocontrols.
Simply connect all the nLight-enabled control devices and the 2VTL2R luminaires using standard Cat-5
cabling. Unique plug-and-play convenience as devices and luminaires automatically discover each other
and self-commission.
Lumen Management: Unique lumen management system (option N80) provides onboard intelligence that
actively manages the LED light source so that constant lumen output is maintained over the system life,
preventing the energy waste created by the traditional practice of over-lighting.
Step-level dimming option allows system to be switched to 50% power for compliance with common energy
codes while maintaining xture appearance.
Driver disconnect provided where required to comply with US and Canadian codes.
INSTALLATION — After existing uorescent components are removed from housing, universal end brackets
are fastened in place with tek screws. The LED light engine assembly mounts to the end brackets and hangs
securely while the wiring connection is made using a driver-disconnect plug system provided as standard.
The light engine then swings up into position and is secured in place with a captive screw at each end. The
door frame is then inserted via a sliding hinge into the end bracket and secured in the closed position with
a rotating cam latch. Light engine may be removed from xture during service. LED boards include plug-in
connectors for easy replacement or servicing. Suitable for damp location installations.
LISTINGS — UL/cUL classied for use in recessed uorescent light xtures. Installation per instructions will
not impact existing xture UL listing. Tested to LM80 standards. DesignLights Consortium® (DLC) qualied
Notes
1 Approximate lumen output.
2 Option ships separately as a eld-installed accessory. Verify compliance with local codes prior to ordering.
3 Gateway not included. Requires on-site commissioning. Visit www.lightingcontrols.com/XPointWireless for
more information.
4 Only available with EZ1 or EZB drivers.
Specications
Designed to convert most existing recessed parabolic and lensed troers.
product. Not all versions of this product may be DLC qualied. Please check the DLC Qualied Products
List at www.designlights.org/QPL to conrm which versions are qualied.
Protected by one or more of US Patent Nos. 7,229,192; D541,467; D541,468; D544,633; D544,634; D544,992.
D544,933 and additional patents pending.
WARRANTY — 5-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Actual performance may dier as a result of end-user environment and application
Note: Specications subject to change without notice.
Volumetric Troer
2VTL2R
2VTL2RT
2' x 2' Relight
LED
ADP
Series Lumens
1
Diuser Voltage Driver Color temperature Controls
2VTL2R 2x2 LED relight assembly,
black end brackets for
use in parabolic xture
2VTL2RT 2x2 LED relight assembly,
white end brackets for
use in troer xture
2VTL2RF 2x2 LED relight assembly,
ange brackets for
drywall installation
20L 2000
33L 3300
40L 4000
ADP Acrylic linear
prismatic
(blank) MVOLT
(120 - 277V)
347 347V
2
EZ1 eldoLED, dims to 1%
EZB Dims to dark
GTH250 Bi-level (2-switch)
EXA1 Dims to 1%, XPoint
wireless enabled
3
EXAB Dims to dark, XPoint
wireless enabled
3
LP835 82 CRI, 3500 K
LP840 82 CRI, 4000 K
LP830 82 CRI, 3000 K
LP850 82 CRI, 5000 K
(blank) No controls
N80 N-light with 80%
lumen management
4
N100 N-light with no
lumen management
4