Cut Sheet

Sheet #: 2UC UNC-120
FEATURES & SPECIFICATIONS
1-3/4" deep design uses T8 or T12 lamps.
Ideal for work stations and under cabinets, unit or row mounting.
Low brightness, linear prism acrylic lens standard.
Convenience outlet and on/off rocker switch available.
Diffuser snaps easily into fixture body flanges.
Certain airborne contaminants can diminish integrity of acrylic.
Click here
for Acrylic Environmental Compatibility table for suitable uses.
BALLAST — Thermally-protected, resetting, Class P, HPF, non-PCB, UL listed
ballast is standard on all T8 and T12 30W and 40W fixtures. Sound rating A.
Standard combinations are CBM approved.
WIRING & ELECTRICAL — Fixture bears UL label and is suitable for damp
locations. AWM, TFN or THHN wire used throughout, rated for required tem-
peratures.
MATERIALS — Metal parts manufactured from code gauge steel. Diffuser is
100% acrylic. No asbestos is used in this product.
FINISH — Five-stage iron-phosphate pretreatment ensures superior paint
adhesion and rust resistance. High gloss, baked white enamel finish.
LISTING — UL listed. Labeled I.B.E.W.—A.F. of L.
Fixture guaranteed for one year against mechanical defects in manufacture. Specifications
subject to change without notice.
Convenience outlet and
rocker switch optional
Series
2UC
2UC
Number of lamps
1
Not included.
1
Lamp type/wattage
15 Nominal 15W T12 (18")
1,2,3
17 Nominal 17W T8 (24")
25 Nominal 25W T8 (36")
32 Nominal 32W T8 (48")
14T5 Nominal 14W T5
4
21T5 Nominal 21W T5
4
28T5 Nominal 28W T5
4
Lens
(blank) Acrylic,
milk white
AR High
impact
resistant
acrylic
Voltage
120
277
347
MVOLT
Others available,
Consult factory.
Options
LP Cool white lamps (installed)
SWR Rocker switch (120V only)
CO Convenience outlet (120 only)
CSA Labeled for shipment to
Canada
GLR Internal fast blow fuse
GEB Electronic ballast,
< 20% THD
GEB10IS Instant start electronic
ballast,
< 10% THD
GEB10PS Program start electronic
ballast,
< 10% THD
NOTES:
1 Low power factor ballast (LPF) standard. High power factor and electronic ballast
(HPF) optional. HPF, LPF or GEB must be specified in options box.
2 277V configurations must be ordered with electronic ballast.
3 15W not available with MVOLT.
4 T5 configurations require GEB10PS.
Undercabinet Light
2UC
T5, T8 or T12 Lamps
4 Lengths
Catalog Number
Notes
Type
Fluorescent
Lead times will vary depending on options selected. Consult with your sales representative.
Example: 2UC 1 25 MVOLT
ORDERING INFORMATION