Cut Sheet
FEATURES & SPECIFICATIONS
INTENDED USE
Ideal for work stations and under cabinets, unit or row mounti.
ATTRIBUTES
Low brightness, linear prism acrylic lens standard.
Convenience outlet and on/off rocker switch available.
Diffuser snaps easily into fixture body flanges.
Certain airborne contaminants can diminish integrity of acrylic.
Click here for Acrylic Environmental Compatibility table for suitable uses.
Thermally-protected, resetting, Class P, HPF, non-PCB, UL listed ballast is standard on all T8 and T12 30W and
40W fixtures. Sound rating A. Standard combinations are CBM approved.
Fixture bears UL label and is suitable for damp locations. AWM, TFN or THHN wire used throughout, rated
for required temperatures.
Metal parts manufactured from code gauge steel. Diffuser is 100% acrylic. No asbestos is used in this product.
Five-stage iron-phosphate pretreatment ensures superior paint adhesion and rust resistance. High gloss,
baked white enamel finish.
LISTINGS
UL listed.
WARRANTY
1-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
NOTE: Actual performance may differ as a result of end-user environment and application.
Specifications subject to change without notice.
Series Number of lamps Lamp type/wattage Lens Voltage Options
2UC (blank) 1 (not included) 15 Nominal 15W T12 (18”)
1,2,3
17 Nominal 17W T8 (24”)
25 Nominal 25W T8 (36”)
32 Nominal 32W T8 (48”)
14T5 Nominal 14W T5
4
21T5 Nominal 21W T5
4
28T5 Nominal 28W T5
4
(blank) Acrylic, milk white
AR High impact resistant acrylic
120
277
347
MVOLT
Others available;
consult factory.
LP Cool white lamps (installed)
SWR Rocker switch (120V only)
CO Convenience outlet (120 only)
CSA Labeled for shipment to Canada
GLR Internal fast blow fuse
GEB Electronic ballast, < 20% THD
GEB10IS Instant start electronic ballast, < 10% THD
GEB10PS Program start electronicballast, < 10% THD
Undercabinet Light
2UC
T5, T8 or T12 Lamps
4 Lengths
Catalog
Number
Notes
Type
Lead times will vary depending on options selected.
ORDERING INFORMATION
Example: 2UC 25 MVOLT
Notes
1 Low power factor ballast (LPF) standard. High power factor and
electronic ballast (HPF) optional. HPF, LPF or GEB must be specified in
options box.
2 277V configurations must be ordered with electronic ballast.
3 15W not available with MVOLT.
4 T5 configurations require GEB10PS.
DIMENSIONS
Nominal
Size
Width Length
Height
(Depth)
18" 5-1/4" 18-1/4" 1-3/4"
24" 5-1/4" 24-1/2" 1-3/4"
36" 5-1/4" 36-1/4" 1-3/4"
48" 5-1/4" 48-1/4" 1-3/4"
2UC
DECORATIVE INDOOR & OUTDOOR: One Lithonia Way Conyers, GA 30012 Phone: 800-748-5070 Fax: 770-860-3903 www.lithonia.com © 1996-2016 Acuity Brands Lighting, Inc. All rights reserved. Rev.
08/18/16