Specification Sheet

One Lithonia Way, Conyers, GA 30012 | 770-922-9000 | www.lithonia.com
© 2018 Acuity Brands Lighting, Inc. All rights reserved. Rev. 05/08/18 Page 2 of 2
CONTRACTOR SELECT GTL LED LENSED TROFFER
INTENDED USE:
The GTL Series LED recessed troffer provides all of the great benets of an LED luminaire,
while maintaining the familiar look of traditional linear uorescent. This allows for a seamless
one-for-one transition to LED without disrupting the look of the overall space. With up to
53% energy savings, this value driven luminaire helps bridge the price gap between LED
and uorescent. All of these benets make the GTL a great choice for School, Ofce, Retail,
Residential and Hospital applications. Certain airborne contaminants can diminish
integrity of acrylic. Click here for Acrylic Environmental Compatibility table for
suitable uses.
CONSTRUCTION:
Smooth hemmed sides and smooth inward formed end anges for safe handling.Lighter-
weight xture allows for safe, easy installation. The shallow depth of the 2x2 and 2x4 (3 ¼”)
allows for easier installations into restricted plenum applications.
OPTICS:
Highly transmissive prismatic pattern lens helps to diffuse the LED source pixilation, without
compromising light output.
ELECTRICAL:
Long-life LEDs, coupled with high-efciency drivers, provide extended service life. 80% LED
lumen maintenance at 72,000 hours (L80/72,000).
INSTALLATION:
Drivers and internal components are accessible from the oor. LED boards include plug-in
connectors for future upgrades. Suitable for direct insulation contact. Damp location listed.
LISTINGS:
CSA certied to US and Canadian safety standards. Damp location listed.
DesignLights Consortium® (DLC) qualied product. Not all versions of this product may be
DLC qualied. Please check the DLC Qualied Products List at www.designlights.org/QPL to
conrm which versions are qualied.
WARRANTY:
5-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specications subject to change without notice.
Specifications Dimensions
3-1/4
(8.2)
24
(61.0)
Length: 24 (61.0)
Width: 24 (61.0)
Depth: 3-1/4 (8.2)
Length: 48 (122.0)
Width: 24 (61.0)
Depth: 3-1/4 (8.2)
All dimensions are inches (centimeters) unless otherwise indicated.
3-1/4
(8.2)
24
(61.0)