Installation Guide

U999350, Rev A, 10/18/2016
BLT LED IMPORTANT SAFETY INSTRUCTIONS
Diffuser
 Cleaning of the outside of the diffuser can be done with a soft cloth and water. The diffuser does not need
to be removed for cleaning.
 The diffuser does not require removal during normal operation. However, if maintenance of LED’s is
required, the diffuser is removable.
 Luminaires with IP5X nomenclature, it is recommended that diffuser should not be removed. Any cleaning
should be done only outside the diffuser.
Diffuser Removal
1. Locate screw on the end cap of the fixture.
2. Remove screw and push trim ring locking pins in and towards the diffuser. Carefully pull trim ring down and
away from the diffuser while holding the diffuser in place.
Screw Placement
Trim Ring
Locking Pin
End Cap
Trim Ring
Diffuser