Cut Sheet

2BLT2R Volumetric Recessed Lighting 2'x2' Relight

2BLTR2X2

Page 4 of 9

1. Power: Install JOT enabled fixtures and controls as instructed.

2. Pair: Insert the pairing tool into the pinhole on the wall switch; press and hold any button for 6 seconds.

3. Play: Once paired, each fixture will individually dim down to 10% brightness. All products will be fully functional.

BLTR Series

SensorSwitch

WSXA JOT

SensorSwitch JOT Enabled Wireless Solution

Designed with contractors in mind, the SensorSwitch JOT enabled wireless solution offers a straightforward

approach to the installation and pairing of lighting fixtures and controls. Absolutely no 0-10V control wires and no

mobile apps are needed with JOT enabled products, allowing for lightning speed installation right out of the box.

BLTR Series

with integrated

JOT OCC

Sensors

SensorSwitch

SPODMRA JOT

JOT Wireless

Application Guide

2BLT2R — Typically used for lensed troer installations. Assembly contains white end brackets and is

supplied with white trim strips for use in closing gaps down xture sides (installer's choice - not required).

*Note: This kit will t in Lithonia's Avante non-air xture.

2BLT2R A — Typically used for parabolic installations with black reveal. Assembly contains black end brackets

to match black reveal around host housing. Does not interfere with host housing air supply/return if present

(along xture sides).