Instruction Manual

CONNECTING DEVICES
If other devices (such as laptops, tablets, phones etc) want to play through the Bluetooth
speakers please follow the steps below:
1. FIRST CONNECTION: If device A connects and controls to Bluetooth, Device B
cannot search or control the Bluetooth speaker. Device A MUST no longer be connected,
then Device B can connect and control.
2. SECOND CONNECTION: If Device A is connected and has control, Device B can’t
connect to Bluetooth until Device A disconnects, enabling Device B to control the
Bluetooth speakers.
3. ADDITIONAL DEVICES: If additional Devices want to connect to Bluetooth speakers,
a maximum of 2 devices can connect at any one time, only the 1st device to connect
controls the speakers. Please ensure devices A or B are disconnected before trying to
connect additional devices C, D, E etc...
NOTE: If your connection to speaker is lost, the device maybe out of range (>30m).
To reconnect simply go to the Bluetooth setting menu on your device and reconnect to
Lithe Audio BT speaker.
HARD WIRED INPUT- RCA INPUT
To connect other devices that may not have a Bluetooth
connection (such as TV, CD players, BluRay player etc) to play
through the speakers please follow the steps below:
RCA CONNECTION: To play music via speaker RCA
connection connect an RCA cable to the speaker and play
through your device. Ensure ALL Bluetooth connections are
turned off to be able to play through the speaker. The LED
will turn green when playing using RCA.
ADDITIONAL SPEAKER - OPTIONAL
PLEASE NOTE: LBT2 DOES NOT INCLUDE PASSIVE SPEAKER
The Lithe Audio Master Bluetooth ceiling
speaker is able to connect to and power an
addtional passive speaker via the speaker out-
put (+/-). Use wire cutters to strip the ends of
the speaker cable (if required).
6