Instruction Manual
THANK YOU FOR
CHOOSING LITHE AUDIO
Innovative design and advanced engineering come as standard in our LBT2 series of wireless
Bluetooth ceiling speakers. Designed for easy installation and high quality sound, within minutes
each room is setup and ready. This manual details the installation of LBT2 series speakers within
conventional stud and sheetrock (Joist and plasterboard) ceilings.
IMPORTANT SAFETY WARNING
Before use please read completely and use in accordance with these safety instructions.
Before commencing any electrical work ensure the supply is switched OFF at the mains. Either
by switching off the consumer unit or by removing the appropriate fuse. This product should
be installed in accordance with the relevant sections of the building regulations code and in
accordance with the latest edition of IEE regulations (BS 7671).
If the unit is to be used as a replacement for an existing product, remove the existing unit from its
location and disconnect the wiring. Connect the wires as shown in the diagram. Ensure terminals
EVITVSTIVP]XMKLXIRIHERHIRWYVIRSFEVI[MVIWEVIZMWMFPI;LIR½XXMRKXLIWTIEOIVMRXSXLI
ceiling, ensure no wires are trapped.
READ THE INSTRUCTIONS CAREFULLY BEFORE STARTING THE
INSTALLATION PROCESS AND KEEP THEM SAFE FOR FUTURE
REFERENCE.
• Failure to follow the instructions in this guide voids all warranties on your speakers.
• Warning: Do not use the product in water.
• Warning: Do not install speaker directly above any heat sources such as radiators, or other
apparatus that produce heat.
• ;EVRMRK8SVIHYGIXLIVMWOSJ½VISVIPIGXVMGWLSGOHSRSXI\TSWIXLMWWTIEOIVXSVEMRSV
moisture (directly above bath or shower area) or in Bathroom Zone 0 or Zone 1.
• Protect the power cable from being damaged, do not over stretch cable.
• 3RP]YWIEXXEGLQIRXWEGGIWWSVMIWWTIGM½IHF]XLIQERYJEGXYVIV0MXLI%YHMS
• Turn off the power to the speaker when unused for long periods of time.
• A Fire and Acoustic speaker hood must be used in accordance with UK building and IEE
6IKYPEXMSRW[MXLE½VIVEXMRKSJYTXSQMRYXIWMW4EVXW&0'ERH)GSQTPMERX
• Do not open the back cover to the speaker as this protects the PCB, doing so will invalidate
the warranty and could cause electric shock.
• Ensure speaker location is free from obstructions such as electrical conduit, HVAC ducts or
Water lines.
BLUETOOTH CEILING SPEAKER
1