User Manual

KNOW YOUR SPEAKER
The Lithe Audio LBT2 range of Bluetooth ceiling wireless speakers have various inputs:
SPEAKER OUTPUT - To connect one additional passive (Slave) speaker (Gold Plated)
LITHE-LINK
TM
- Connect 2 additional LBT speakers (Total 3 masters & 3 passives)
RCA INPUTS - To connect directly from TV Output, Amazon echo dot, DVD Player etc..
POWER INPUT - To connect (as supplied) transformer
INSTALLATION
IMPORTANT: BEFORE COMMENCING ANY ELECTRICAL WORK ENSURE
THE SUPPLY IS SWITCHED OFF AT THE MAINS. IF YOU ARE UNSURE HOW
TO FIT SEEK HELP FROM A PROFESSIONAL ELECTRICIAN/AV INSTALLER
1. Mark out the position of the speaker using
a, tape measure and mark using a pencil with
the template supplied. Check using a stud
nder to make sure no obstruction is present
prior to cutting.
3. Connect the Power lead from the
transformer (supplied) to a 13A mains plug
socket or terminate to a dedicated 3A fused spur.
Ensure the power lead is not overstretched.
2. Drill a pilot hole and cut the speaker hole
using a cutting saw. Take caution when
cutting to keep ngers away from cutting
blade and wear protective eyewear.
4. Insert speaker into the ceiling then using a
screwdriver lock the 4 dog leg xings to secure
the speaker in place, do not over tighten.
Attach the magnetic grille to the speaker front.
Power input 24V/2.5A
RCA-(Black)
R+ (Red) R- (Black)
RCA+(Red)
Speaker output
Lithe Link connections
RCA Input
Stereo / bridged
Mono selector
50% Volume capping
BLUETOOTH CEILING SPEAKER
Dog leg easy install xings (4)
6.5” (165mm) Kevlar/Polyproplene cone
Requires a in ceiling depth of
3.8” (95mm)
Built in Amplier
& Bluetooth driver
Magnets for Cover (8)
Enviromental equalizer
(+/- 3db)
LED indicator
Connection Reset Button
PAINTING THE SPEAKER GRILLE
Do not paint the speaker grilles whilst attached to the speaker. Lithe Audio reccomends spray
painting using 5 parts thinning agent to 1 part paint. Spray thinly to ensure speaker cover grille holes
are not blocked as this will effect the sound quality of the speakers.
INSTALLATIONS IN FIRE-RATED CEILINGS
If you plan to mount your speakers in a re-rated ceiling, you should purchase a re hood for the
speaker. Visit www.litheaudio.com for more information and recommended hoods.
In built over voltage, under voltage, over temperature, and short circuit protection, if there is an electrical fault,
the power supply to the amplier will cut off automatically and restart when the speaker has stabilised.
3 4