Installation Guide

Outlet

Box

ASSEMBLY INSTRUCTIONS

Unwrap BARE wire on fixture (A) from BLACK and

WHITE wires. Prepare wires by stripping 3/4 in. of

insulation from wire ends using wire strippers (not

included). Connect BARE/GREEN ground wire from

outlet box to BARE ground wire from fixture (A) with

wire connector (AA). Connect WHITE wire from

fixture (A) to WHITE wire from outlet box using

existing wire connector or wire connector (AA).

Connect BLACK wire from fixture (A) to BLACK wire

from outlet box using existing wire connector or wire

connector (AA).

NOTE: Screw wire connectors (AA) on in a

clockwise direction.

WARNING: Never connect ground wire to

WHITE or BLACK power supply wires.

WARNING: To reduce the risk of fire, electrical

shock or personal injury, wire connectors (AA) are

designed to accept only one 12-gauge house wire

and two lead wires from the light fixture. If your

house wire is larger than 12-gauge or there is more

than one house wire to connect to the corresponding

fixture lead wires, consult an electrician for the

proper size wire connectors to use.

Hardware Used

Wire Connector

x 3

WHITE

BLACK

BARE/

GREEN

Outlet Box

Wrap electrical tape (not included) around each

individual wire connector (AA) down to the wire.

WARNING: Make sure no bare wire or wire

strands are visible after making connections.

Push wire connectors (AA) gently back into outlet

box. Carefully push excess wiring into outlet box.