Installation Guide

ASSEMBLY INSTRUCTIONS
7
Wrap electrical tape (not included) around each
individual wire connector (AA) down to the wire.
Push wire connectors (AA) gently back into outlet
box. Carefully push excess wiring into outlet box.
WARNING: Make sure no bare wire or wire
strands are visible after making connections.
7
7.
A
AA
AA
8
8.
9.
Align holes in fixture (A) with screws on
mounting plate (B) and push fixture (A) toward
wall. Attach fixture (A) to mounting plate (B)
using the decorative nuts (E) previously
removed (Step 3, page 5).
NOTE: Fixture (A) can be installed with socket
facing either up or down.
Remove socket ring (F) from socket on fixture
(A). Attach glass shade (sold separately) to the
socket using socket ring (F).
If applicable, repeat for remaining sockets.
CAUTION: Do not overtighten socket ring
(F) as glass may crack or break.
9
A
E
F
Glass Shade
(representative only)
A