Installation Guide

ASSEMBLY INSTRUCTIONS
7
7.
Attach fixture (A) to mounting plate (C) using
the mounting plate screws (B) previously
removed (Step 3, Page 5).
NOTE: Before tightening mounting plate
screws (B) completely, use level (not included)
to check fixture (A) - adjust if necessary.
8.
7
B
A
C
B
Outlet
Box
9.
8
9
A
C
E
Socket
A
Bulb
Remove socket rings (E) from sockets of
fixture (A). Attach glass shades (C) to sockets,
securing with socket rings (E).
WARNING: Do not overtighten socket
rings (E) as glass may crack or break.
Install three 60-watt max. standard-base
incandescent bulbs (not included) or CFL/LED
equivalent.
WARNING: When replacing bulbs, allow
bulbs, glass shades and fixture to cool down
before touching.
Restore power and test fixture (A).
If lights do not function, please refer to
TROUBLESHOOTING on the following page.