Installation Guide

ASSEMBLY INSTRUCTIONS

Prepare wires by stripping 3/4 in. of insulation

from wire ends using wire strippers (not included).

Connect WHITE wire from fixture (A) to WHITE

wire from outlet box using existing wire connector

or wire connector (AA). Connect BLACK wire

from fixture (A) to BLACK wire from outlet box

using existing wire connector or wire connector

(AA). Connect BARE/GREEN ground wire from

outlet box to BARE ground wire from fixture (A)

with wire connector (AA).

NOTE: Screw wire connectors (AA) on in a

clockwise direction.

WARNING: Never connect ground wire to

WHITE or BLACK power supply wires.

WARNING: To reduce the risk of fire,

electrical shock or personal injury, wire

connectors (AA) are designed to accept only one

12-gauge house wire and two lead wires from the

light fixture. If your house wire is larger than

12-gauge or there is more than one house wire to

connect to the corresponding fixture lead wires,

consult an electrician for the proper size wire

connectors to use.

Hardware Used

Wire Connector

x 3

Wrap electrical tape (not included) around each

individual wire connector (AA) down to the wire.

Push wire connectors (AA) gently back into outlet

box. Carefully push excess wiring into outlet box.

WARNING: Make sure no bare wire or wire

strands are visible after making connections.

Outlet

Box

WHITE

BARE/GREEN

BLACK

Outlet

Box