ITEM #1055725 3-LIGHT VANITY BAR MODEL #VB19-3BZB Français p. 9 Español p. 17 ATTACH YOUR RECEIPT HERE E342246 Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-800-527-1292, 8:30 a.m. - 5 p.m.
PACKAGE CONTENTS PART A B DESCRIPTION QUANTITY Fixture Mounting Plate Screw (preassembled to fixture (A)) Mounting Plate (preassembled to fixture (A)) Glass Shade Socket Ring (preassembled to fixture (A)) C D E A 1 2 1 3 3 B C E D HARDWARE CONTENTS (shown actual size) AA Wire Connector Qty. 3 BB Machine Screw Qty. 2 SAFETY INFORMATION READ AND SAVE THESE INSTRUCTIONS.
SAFETY INFORMATION • DO NOT connect the bare or green insulation fixture ground wire to the black (HOT) current-carrying wire or the white (NEUTRAL) house wire. Connection of the bare or green fixture ground wire to the black or white house wires may cause metal parts of the fixture to carry electrical currents. Under this condition anyone coming in contact with the fixture will receive electrical shock, which could cause serious injury or death.
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
ASSEMBLY INSTRUCTIONS 3. Remove mounting plate (C) from fixture (A) by removing mounting plate screws (B) from the fixture (A). 3 B C A Save mounting plate screws (B) for later use. B 4. Attach mounting plate (C) to outlet box (not included) using existing washers and outlet box screws or the machine screws (BB). 4 C NOTE: If the outlet box screws required for your outlet box are of a different size than the machine screws (BB), consult a licensed electrician before proceeding.
ASSEMBLY INSTRUCTIONS 5. Prepare wires by stripping 3/4 in. of insulation from wire ends using wire strippers (not included). Connect WHITE wire from fixture (A) to WHITE wire from outlet box using existing wire connector or wire connector (AA). Connect BLACK wire from fixture (A) to BLACK wire from outlet box using existing wire connector or wire connector (AA). Connect BARE/GREEN ground wire from outlet box to BARE ground wire from fixture (A) with wire connector (AA).
ASSEMBLY INSTRUCTIONS 7. Attach fixture (A) to mounting plate (C) using the mounting plate screws (B) previously removed (Step 3, Page 5). 7 B NOTE: Before tightening mounting plate screws (B) completely, use level (not included) to check fixture (A) - adjust if necessary. C A Outlet Box B 8. Remove socket rings (E) from sockets of fixture (A). Attach glass shades (C) to sockets, securing with socket rings (E). 8 A WARNING: Do not overtighten socket rings (E) as glass may crack or break.
CARE AND MAINTENANCE • Shut off main power supply. Wipe fixture with soft, damp cloth. Use window cleaner to clean glass. Do not use an abrasive cleaner on glass or fixture. TROUBLESHOOTING WARNING: Before beginning work, shut off the power supply to avoid electrical shock. PROBLEM Bulb(s) will not light. POSSIBLE CAUSE 1. Bulb(s) is/are burned out. 2. Power is OFF. 3. Faulty connection. CORRECTIVE ACTION 1. Replace light bulb(s). 2. Make sure power supply is ON. 3. Check wiring and all connections.
