Installation Guide

ASSEMBLY INSTRUCTIONS

Remove mounting plate (C) from fixture (A) by

removing mounting plate screws (B) from the

fixture (A).

Save mounting plate screws (B) for later use.

Attach mounting plate (C) to outlet box (not

included) using existing washers and outlet box

screws or the machine screws (BB).

NOTE: If the outlet box screws required for your

outlet box are of a different size than the machine

screws (BB), consult a licensed electrician before

proceeding. Tighten machine screws (BB) to

secure mounting plate (C).

CAUTION: Make sure the outlet box can

support 35 lbs. hanging weight. Use metal outlet

box; plastic outlet boxes are not recommended.

Hardware Used

Machine Screw

x 2

Outlet Box