Installation Guide

ASSEMBLY INSTRUCTIONS
9.
Remove socket rings (C) from sockets of fixture
(A). Attach glass shades (D) to sockets,
securing with socket rings (C).
WARNING: Do not overtighten socket rings
(C) as glass may crack or break.
8
Socket
Outlet
Box
8.
Align holes in fixture (A) with fixture screws (CC)
on mounting plate (B). [NOTE: Fixture (A) can
be installed with the sockets facing either up or
down.] Push fixture (A) toward wall. Attach
fixture (A) to mounting plate (B) using the
decorative nuts (DD).
NOTE: Before tightening decorative nuts (DD)
completely, use level to check fixture (A) and
adjust if necessary.
Hardware Used
Fixture Screw
x 2
CC
Decorative Nut
x 2
DD
8
B
CC
CC
A
DD
DD
9
D
C
A
C