Energy Guide

Remove pin (E) and clip (F) from yoke at top of

motor assembly (D) and partially loosen

preassembled set screws.

*Helpful Hint: Downrod-style mounting is best

suited for ceilings 8 ft. (2.44 m) high or higher. For

taller ceilings you may want to use a longer downrod

(not included) than the one provided. A longer

downrod is sometimes necessary to ensure proper

blade clearance.

Secure mounting bracket (C) to outlet box (not

included) using screws, spring washers, and flat

washers provided with the outlet box.

*NOTE: It is very important that you use the

proper hardware when installing the mounting

bracket (C) as this will support the fan.

INITIAL INSTALLATION

FAN MOUNTING

Set Screw