Energy Guide

13
FINAL INSTALLATION
5.
Install bulbs (R).
WARNING: When you need to replace bulb(s),
please allow the bulb(s) and glass shade to cool
down before touching them.
5
R
R
6.
Align slots on glass shade (S) with nodules on the
inside of the light kit fitter (Q). Turn glass shade (S)
clockwise until it no longer turns.
NOTE: Pull down gently on the glass shade (S) to
make sure it is secured completely.
Assembly is now complete.
S
Q
6
Slot
Nodule
(on inside)
Motor Plate
D
INSTALLING FAN WITHOUT LIGHT KIT
1.
To install the fan without the light kit, remove one
motor plate screw (N) from motor plate on underside
of motor assembly (D) and partially loosen the other
two motor plate screws (N). Align slotted holes in
fitter plate (T) with loosened motor plate screws (N),
then twist it clockwise until it locks. Re-insert motor
plate screw (N) previously removed and securely
tighten all three motor plate screws (N).
1
N
T