Installation Guide

2. Parts Inventory.
a. hanging bracket. 1 piece
b. 4.5 in. downrod and hanging ball. 1 piece
c. canopy. 1 piece
d. yoke cover. 1 piece
e. canopy cover. 1 piece
f. switch housing. 1 pieces
g. blade arm. 5 pieces
h. motor housing. 1 piece
i. blade. 5 pieces
j. threaded washer (pre-attached to light kit
fitter). 1 piece
k. finial plate (pre-attached to light kit fitter).
1 piece
l. finial (pre-attached to light kit fitter). 1 piece
m. light kit fitter. 1 piece
n. glass shade. 1 piece
o. hardware packs
page 2
d
h
e
abc
1. Unpacking Your Fan.
Carefully open the packaging. Remove items
from Styrofoam inserts. Remove motor housing
and place on carpet or Styrofoam to avoid
damage to finish. Do not discard fan carton or
Styrofoam inserts should this fan need to be
returned for repairs.
Check against parts inventory that all parts have
been included.
g
IMPORTANT REMINDER: You must
use the parts provided with this fan for
proper installation and safety.
i
n
m
o
l
k
j
bulbs required:
3 x 40 watt max. candelabra base bulbs
(included)
f