Installation Guide

page 5
6. Wiring.
CAUTION: Be sure outlet box is properly
grounded and that a ground wire (GREEN or
Bare) is present.
Make sure all electrical connections comply
with Local Codes or Ordinances and the
National Electrical Code. If you are unfamiliar
with electrical wiring or if the house/building
wires are different colors than those referred to
below, please use a qualified electrician.
When fan is secured in place on the hanging
bracket, electrical wiring can be made as
follows:
Connect BLACK and BLUE wire from fan to
BLACK wire from ceiling with wire connector
provided.
Connect WHITE wire from fan to WHITE wire
from ceiling with wire connector provided.
Connect all GROUND (GREEN) wires
together from fan to BARE/GREEN wire from
ceiling with wire connector provided.
If you intend to control the fan light with a
separate light switch, connect BLUE wire
from fan to the BLACK supply from the
independent switch.
* Wrap each wire connector separately with
electrical tape as an extra safety measure.
motor assembly
*
GREEN
hanging
bracket
WHITE
WHITE
BLACK
BLACK
BLUE
GROUND
(GREEN OR BARE)