Installation Guide

Install two 60-watt max. standard-base
incandescent bulbs (not included) or CFL/LED
equivalent.
WARNING: When replacing bulbs, please
allow bulbs and fixture to cool down before
touching.
ASSEMBLY INSTRUCTIONS
7
8.
8
Bulb
Align hole in glass shade (B) with threaded rod
(E) and push up gently on glass shade (B) until
threaded rod (E) comes through hole in glass
shade (B). Re-attach rubber washer (F) and flat
washer (G). Secure glass shade (B) with nut
(H) previously removed (Step 7, page 6).
WARNING: Do not overtighten nut (H) as
glass may crack or break.
9.
A
Attach glass shade housing (J) and secure with
finial (I) previously removed (Step 7 page 6).
WARNING: Do not overtighten finial (I) as
glass may crack or break.
10
10.
9
E
B
H
F
G
I
A
J