Installation Guide

Attach mounting strap (C) to outlet box (not
included) using existing washers and outlet box
screws or the machine screws (BB). NOTE: If the
outlet box screws required for your outlet box are of
a different size than the machine screws (BB),
consult a licensed electrician before proceeding.
Tighten machine screws (BB) to secure mounting
strap (C) to outlet box.
CAUTION: Make sure the outlet box can support
35 lbs. hanging weight. Use metal outlet box; plastic
outlet boxes are not recommended.
ASSEMBLY INSTRUCTIONS
5
3.
Machine Screw
x 2
BB
3
Washer
BB
Outlet Box
C
Hardware Used
Unwrap BARE fixture wire from BLACK and WHITE
fixture wires. Prepare wire by stripping 3/4 in. of
insulation from wire ends using wire strippers (not
included). Connect WHITE wire from fixture (A) to
WHITE wire from outlet box using existing wire
connector or wire connector (AA). Connect BLACK
wire from fixture (A) to BLACK wire from outlet box
using existing wire connector or wire connector (AA).
Connect BARE/GREEN ground wire from outlet box
to BARE ground wire from fixture (A) using existing
wire connector or wire connector (AA).
NOTE: Screw wire connectors (AA) on in a clockwise
direction.
WARNING: Never connect BARE/GREEN
ground wire to WHITE or BLACK power supply wires.
WARNING: To reduce the risk of fire, electrical
shock or personal injury, wire connectors (AA) are
designed to accept only one 12-gauge house wire
and two lead wires from the light fixture. If your house
wire is larger than 12-gauge or there is more than
one house wire to connect to the corresponding
fixture lead wires, consult an electrician for the proper
size wire connectors to use.
4.
x 3
Hardware Used
Wire Connector
AA
4
A
Outlet Box
BARE/
GREEN
BLACK
BARE
AA
WHITE
WHITE
BB
WHITE
AA
BLACK
AA