ITEM #1055728 FLUSHMOUNT CEILING FIXTURE MODEL #CL20BZA Français p. 9 Español p. 17 ATTACH YOUR RECEIPT HERE E358409 Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-800-527-1292, 8:30 a.m. - 5 p.m., CST, Monday - Friday.
PACKAGE CONTENTS PART A B C D E F G H I J DESCRIPTION Fixture Glass Shade Mounting Strap Fixture Screw (preassembled to Mounting Strap (C)) Threaded Rod Rubber Washer (preassembled to Threaded Rod (E)) Flat Washer (preassembled to Threaded Rod (E)) Nut (preassembled to Threaded Rod (E)) Finial (preassembled to Threaded Rod (E)) Glass Shade Housing QUANTITY 1 1 1 2 A B 1 1 C 1 D 2 E F 1 G H I 1 J HARDWARE CONTENTS (shown actual size) AA Wire Connector BB Machine Screw Qty. 3 Qty.
SAFETY INFORMATION DANGER • DO NOT connect this fixture to an electrical system that does not provide a means for equipment grounding. Never use a fixture in a two-wire system that is not grounded. Installing a fixture into an electrical system not having a proper grounding means could cause metal parts of the fixture to carry electrical currents if any of the fixture wires, wire connections or splices were to become broken, cut or loose during the mounting or normal operation of the fixture.
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
ASSEMBLY INSTRUCTIONS 3. Attach mounting strap (C) to outlet box (not included) using existing washers and outlet box screws or the machine screws (BB). NOTE: If the outlet box screws required for your outlet box are of a different size than the machine screws (BB), consult a licensed electrician before proceeding. Outlet Box 3 Tighten machine screws (BB) to secure mounting strap (C) to outlet box. C CAUTION: Make sure the outlet box can support 35 lbs. hanging weight.
ASSEMBLY INSTRUCTIONS 5. Wrap electrical tape (not included) around each individual wire connector (AA) down to the wire. WARNING: Make sure no bare wire or wire strands are visible after making connections. Carefully arrange excess wiring and wire connectors (AA) within outlet box. Outlet Box 5 AA AA 6. Align keyhole slots on fixture (A) with fixture screws (D) on mounting strap (C) and push up. Turn fixture (A) clockwise until it no longer turns.
ASSEMBLY INSTRUCTIONS 8. Install two 60-watt max. standard-base incandescent bulbs (not included) or CFL/LED equivalent. 8 A WARNING: When replacing bulbs, please allow bulbs and fixture to cool down before touching. Bulb 9. Align hole in glass shade (B) with threaded rod (E) and push up gently on glass shade (B) until threaded rod (E) comes through hole in glass shade (B). Re-attach rubber washer (F) and flat washer (G). Secure glass shade (B) with nut (H) previously removed (Step 7, page 6).
ASSEMBLY INSTRUCTIONS 11. Restore power and test fixture (A). 11 A If light does not function, please refer to the TROUBLESHOOTING guide below. CARE AND MAINTENANCE • Shut off main power supply. Wipe fixture with soft, damp cloth. Use window cleaner to clean glass. Do not use an abrasive cleaner on glass or fixture. TROUBLESHOOTING WARNING: Before beginning work, shut off the power supply to avoid electrical shock. PROBLEM Bulb(s) will not light. POSSIBLE CAUSE 1. Bulb(s) is/are burned out. 2.
