Installation Guide

6
ASSEMBLY INSTRUCTIONS
8.
Attach connecting chain link (J) on end of chain (I)
to fixture loop at the top of the decorative rod (B).
48
B
I
J
7.
Slide decorative rod (B) down wiring to top of
fixture (A). Attach decorative rod (B) to fixture (A)
by turning decorative rod (B) clockwise until it no
longer turns, Make sure wires do not get twisted.
NOTE: Adjust wire length by pulling wires from
fixture (A) until taut.
47
B
A
6.
Attach screw collar loop (G) with connecting
chain link (J) to threaded rod (E) on mounting
strap (D). Leave connecting chain link (J) open
for now.
Tighten second hex nut (F) on threaded rod (E)
against screw collar loop (G).
46
D
F
E
J
G
Fixture
Loop