Installation Guide
5
ASSEMBLY INSTRUCTIONS
Attach mounting strap (D) to outlet box (not
included) using existing washers and outlet box
screws or the machine screws with nuts (BB).
NOTE: If the outlet box screws required for your
outlet box are of a different size than the machine
screws (BB), consult a licensed electrician before
proceeding.
CAUTION: Make sure the outlet box can
support 35 lbs. hanging weight. Use metal outlet
box; plastic outlet boxes are not recommended.
3.
5.
Remove threaded ring (H) from screw collar
loop (G) and save for later use. Open
connecting chain link (J) and remove from
chain (I) along with screw collar loop (G).
4.
Hardware Used
Machine screw
x 2
BB
H
G
Temporarily place canopy (C) over mounting
strap (D) to determine amount of adjustment
necessary for threaded rod (E).
NOTE: Canopy (C) should fit flush against
ceiling when mounted. Once threaded rod (E)
is adjusted, tighten hex nut (F) closest to the
mounting strap (D) so it is secure.
Set canopy (C) aside.
Washers
D
43
Outlet Box
BB
4
C
F
D
E
5
G
I
J
J