Installation Guide

15.
9
CARE AND MAINTENANCE
TROUBLESHOOTING
WARNING: Before beginning work, shut off the power supply to avoid electrical shock.
Fuse blows out or
circuit breaker trips.
1. Crossed wires.
2. Power wire is grounding out.
1. Check wiring.
2. Check all connections.
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
• Shut off main power supply. Wipe fixture with soft, damp cloth. Use window cleaner to clean glass.
Do not use an abrasive cleaner on glass or fixture.
15
16.
16
A
Restore power and test fixture (A).
If lights do not function, please refer to
TROUBLESHOOTING below.
Install candelabra-base 40-watt max.
incadescent bulbs (not included) or CFL/LED
equivalent.
WARNING: When replacing bulbs, allow
bulbs and fixture to cool down before
touching.
A
Bulb
(not included)
ASSEMBLY INSTRUCTIONS
Bulb(s) will not light.
1. Bulb(s) is/are burned out.
2. Power is OFF.
3. Faulty connection.
1. Replace light bulb(s).
2. Make sure power supply is ON.
3. Check wiring and all connections.