Installation Guide

Wrap electrical tape (not included) around each
individual wire connector (AA) down to the wire.
WARNING: Make sure no bare wire or wire
strands are visible after making connections.
Carefully arrange excess wiring and wire
connectors (AA) within outlet box.
8
13
13.
AA
AA
AA
Outlet Box
ASSEMBLY INSTRUCTIONS
12.
Connect SMOOTH wire from fixture (A) to BLACK
wire from outlet box using wire connector (AA).
Connect RIBBED wire from fixture (A) to WHITE
wire from outlet box using wire connector (AA).
Connect BARE/GREEN wire from outlet box to
BARE ground wire from fixture (A) using wire
connector (AA).
NOTE: If outlet box does not have a
BARE/GREEN wire, the BARE ground wire from
fixture (A) should be attached to the GREEN
SCREW (labeled GND) on mounting strap (D).
Hardware Used
Wire Connector
x 3
AA
14.
Slide canopy (C) and threaded ring (H) up the
chain (I). Secure canopy (C) by tightening the
threaded ring (H).
14
BLACK
SMOOTH
WHITE
RIBBED
12
Outlet
Box
BARE
BARE/
GREEN
AA
AA
AA
GREEN
Ground Screw
D
Outlet Box
C
H
I