Installation Guide

7
ASSEMBLY INSTRUCTIONS
10.
Feed chain (H) and wiring through threaded ring
(E) and then canopy (B), allowing threaded ring
(E) and canopy (B) to slide down chain (H) until
they reach the top of the fixture (A).
Lift chain (H) toward screw collar loop (F) and
hang chain (H) on connecting chain link (CC).
Close connecting chain link (CC).
9b.
Secure metal band (M) with the three metal strap
supports (N). Take one metal strap support (N)
and attach to hook on the inside of the metal band
(M). Then, align the metal strap support (N) with
the hook at the top of the column (I) and attach.
Repeat for the other two metal strap supports (N).
NOTE: It may require some force to attach the last
metal strap support (N).
9a.
Raise metal band (M) to fixture (A), making sure
to align each tab on inside of metal band (M) with
one of the spokes on the fixture (A).
Hook
Hook
49b
49a
10
B
E
CC
F
Tab
M
M
N
N
A
I
I
H