Installation Instructions

9. Blade Assembly.
8. Canopy Assembly.
WARNING: To reduce the risk of serious
bodily injury, DO NOT use power tools to
assemble the blades. If screws are
overtightened, blades may crack and break.
Remove blade screws and washers from top
of motor housing--leave rubber cushions
intact.
Lower one of the blades over a rubber
cushion and attach the blade with 2 of the
washers and blade screws that were just
removed, as shown. Tighten both blade
screws securely. Repeat with the remaining
blades.
page 7
blade
canopy set screw
canopy
10. Wall Control Operation.
0 - turns fan OFF
1 - turns fan to LOW speed
2 - turns fan to MEDIUM-LOW speed
3 - turns fan to MEDIUM speed
4 - turns fan to MEDIUM-HI speed
5 - turns fan to HI speed
motor housing
blade screws and washers
Lift canopy until it covers hanging bracket
and touches ceiling. Tighten canopy set
screw to secure canopy.