Manualshelf

Installation Manual

ManualsBrandsLitetronics ManualsOtherLitetronics End-to-End Connector for 1'x4' LED Troffer Retrofit
12345678910
8
1c. Align the second xture and secure with the 2 included
self-tapping screws.
1b. Place the dual connector (RFAC) in the sockets to connect
both LED RetroFits together.
1d. Apply both included labels to the xture.
1a. Place and align the second 1’ x 4’ LED RetroFit with the C14
socket or Litetronics logo as close to the rst LED Retrot as needed
to allow the use of RetroFit accessory.
For 8’ install. Do not restore power until you complete steps 1a-1e below.
Unused branch circuits supplying interconnected retrot luminaires should be properly terminated.
HOW TO USE TWO 1’X4’ RETROFITS TO CREATE 8’ STRIP