Installation Manual

7
10. Place power cord between the two tubes of the LED RetroFit.
Attach the LED RetroFit to the xture cover using the powerful rare
earth magnets. Position the LED RetroFit to preferred alignment.
Secure to the xture with 2 of the included self-tapping screws.
11. Plug the power cord into the power socket.
12. Apply both included labels to the xture.
13. Restore the power and you’re done!
RF16UQT1XXC, RF32UQT1XXC, RF45UQT1XXC
4’ & 8’ STRIP FIXTURE INSTALL
Route and position Retrot wiring within luminaire enclosure
away from mounting hole where screws will be inserted.