Installation Manual

21
10. Replace the end cover you removed earlier and secure it
with 2 screws.
9. Connect conduit wires to the LED RetroFit using wire nuts (not
included). See below chart:
a. black to black
b. white to white
c. green to green/yellow
11. Thread the non loop side of the cable into the cable lock,
and pull the cable through the lock.
Once the LED retrot is wired, it is time to hang the light using the wire cable accessory.
CAUTION: To avoid risk of an electric shock, do not
connect wires from conduit directly to the socket.
RF32UHT1XX, RF45UHT1XX, RF32UQT1XXC AND RF45UQT1XXC
STANDALONE USE