Manualshelf

Installation Manual

ManualsBrandsLitetronics ManualsOtherLitetronics End-to-End Connector for 1'x4' LED Troffer Retrofit
11121314151617181920
20
6. Unscrew the conduit nut from the conduit.
8. Then place the conduit nut over the three conduit
wires. After that, place conduit through knockout hole
and secure with conduit’s nut.
7. Insert the three conduit wires (black, white & green) through
the hole.
5. Remove the preferred knockout from end cover to make
the preferred hole you want to connect conduit.
RF32UHT1XX, RF45UHT1XX, RF32UQT1XXC AND RF45UQT1XXC
STANDALONE USE