Manualshelf

Installation Manual

ManualsBrandsLitetronics ManualsOtherLitetronics End-to-End Connector for 1'x4' LED Troffer Retrofit
11121314151617181920
17
10. Secure junction box with 2 of the included self-tapping
screws.
9. Fully cover the attached disconnect and incoming electrical
wires using the provided magnetic junction box cover. Make sure
the power cord is coming out the direction that allows connection
to the LED RetroFit.
11. Place power cord between the two tubes of the LED RetroFit.
Attach the LED RetroFit to the xture cover using the powerful
rare earth magnets. Position the LED RetroFit to preferred
alignment and secure to the xture with 2 of the included self-
tapping screws.
12. Plug the power cord into the power socket.
RF32UQT1XXC AND RF45UQT1XXC
TROFFER OR WRAP INSTALL