Manualshelf

Installation Manual

ManualsBrandsLitetronics ManualsOtherLitetronics End-to-End Connector for 1'x4' LED Troffer Retrofit
11121314151617181920
13
15. Mount your LED RetroFit which attaches to housing with
powerful rare earth magnets. Position LED RetroFit to preferred
alignment. Secure it to the xture with the 2 included self-
tapping screws.
14. Replace xture cover.
17. Restore the power and you’re done!
16. Apply both included labels to xture.
WARNING: IF RETROFITTING 8’ STRIP, DO NOT RESTORE POWER
YET. CONTINUE WITH 8’ INSTALL STEPS 1A-1E BELOW.
RF32UHT1XX, RF45UHT1XX, RF32UQT1XXC AND RF45UQT1XXC
HARDWIRE STRIP FIXTURE INSTALL