Installation Manual

11
5. On the LED RetroFit RF32UHT1XX and RF45UHT1XX open the
end cover with the Litetronics logo by removing both screws.
6. Once open, the internal black, white and green/yellow wires
to the LED tubes are visible.
8. Remove the preferred knockout from
the end cover of the LED RetroFit and
the  xture to make the hole you want to
connect conduit / box spacer.
7. Strip the black, white and green/yellow wires coming from
the tubes of the LED Retro t to expose about ¼” of wire.
9. Remove the nut from the conduit.
RF32UHT1XX, RF45UHT1XX, RF32UQT1XXC AND RF45UQT1XXC
HARDWIRE STRIP FIXTURE INSTALL