User's Manual

User Manual Rev 1.11

Basic/Smart/Smart Plus/Intelligent Charger-32A

4.3.2 RFID card (for SC3+/IC3 only)

1. Insert the charging plug into the EV

2. Swipe card

3. Waiting for authorizing

4. Charging session started

Stop charging

1. Unplug any time (disconnect the charging plug from EV to stop charging session)

2. Session ended (please return the connector to the holster)

4.4.1 Interrupt charging

Please refer to STOP CHARGING section for more information.

4.4.2 Auto restart

When a charging session is interrupted due to a temporary error condition, the charge point will

automatically restart charging when the cause of the temporary error condition returns to normal.

Status indicator lights remain flashing RED until the error condition is resolved.

• Temporary error conditions include: Over Current, Over Voltage, Under Voltage, and Over

Temperature.

• For Over Current conditions: The charging session will be stop while OC occurs. After recovery from

OC for 30 seconds, the charge point will automatically restart charging for three times.

• When charging session stopped due to CCID trip, the charge point will try to restart after 15 minutes

for 3 times.

4.4.3 Power outage recovery

When power resumes after an outage, the charge point restarts automatically with a delay ranging from

120 to 720 seconds. The delay is designed to avoid impacting the utility grid when multiple charge points

are in the same area attempting to resume charging simultaneously.