User's Manual

User Manual Rev 1.11
Basic/Smart/Smart Plus/Intelligent Charger-32A
64
LLM Status (SC3+/IC3 support only)
3.12.1 LLM information
This page shows the Local Load Management information of the charge point. For more LLM
description, please refer to section 3.9.4.
Network Operation Mode: Indicates the charge point is in Direct mode, a Gateway or a Client.
LLM Mode: Indicates Local Load Management function is enabled or disabled.
Network Status: Indicates if the charge point is online or not.
Gateway Status: Indicates if the charge point is connected to the Gateway if it’s a Client. For Direct and
Gateway, it always shows “Connected to Gateway”.
Network Active Device: Indicates the Network connected via which device. It could be Offline, Wi-Fi or
Cellular.
Local Load Management Status: Display connected charge points, total charge points, Group ID of the
LLM group as well as a full table of detail information each charge point if this charge point is Gateway.