User's Manual

User Manual Rev 1.11

Basic/Smart/Smart Plus/Intelligent Charger-32A

Wi-Fi MAC Address – Display Wi-Fi device hardware MAC address.

Wi-Fi Signal Strength – Display the wireless signal strength of Wi-Fi in percentage (%).

Station Only – If "Station Only" is ON, the charger will stay in station mode always. If "Station Only" is

OFF, it will go into AP mode after 5 times retrying to connect the external Wi-Fi AP.

Note:

The Station Only option only work if remote control type is OCPP. If the remote control type is

APP → it keeps original behavior (retry 5 times and go to AP mode) no matter what Station Only option

selected.

Cellular Settings [Support only on IC3]

MNC – The Mobile Network Code of cellular service provider. There will be no data here if no 3G/LTE

signal.

ICCID – The ICCID of the modem’s SIM card. There will be no data here if no SIM card inserted.

IMSI – The IMSI of the modem’s SIM card. There will be no data here if no SIM card inserted.

IMEI – The IMEI (International Mobile Equipment Identity) of the modem.

MEID – The MEID (Mobile Equipment Identifier) of the modem.