User's Manual

User Manual Rev 1.11

Basic/Smart/Smart Plus/Intelligent Charger-32A

Gateway: Use charge point as a gateway charge point. Gateway connected to OCPP 1.6 Server

via cellular or Wi-Fi and connected to other charge points (called Client) via Wi-Fi and forms a

local charge points group. This group is also a LAN (Local Area Network).

Client: Use charge point as a client charge point. Client connected to Gateway via Wi-Fi. Client

connected to OCPP1.6 Server through gateway charge point (via cellular or Wi-Fi) and Gateway

will dispatch incoming remote command to proper client charge points (or Gateway itself).

NOTE

Network mode are used to change how a group SC3/SC3+/IC3 connecting to the internet. If a

charge point’s network mode is Client, then there must be a Gateway in this group and all client

charge points are connected to the internet via Gateway. These chargers form a Gateway/Client

group. In this group there is exact one Gateway and all other charge points are Client.