User's Manual

User Manual Rev 1.11
Basic/Smart/Smart Plus/Intelligent Charger-32A
47
OCPP1.6 Settings
These settings are defined and request for support in OCPP 1.6 sepcification.
AllowOfflineTxForUnknownId – If set to yes, an unknown ID (not in Authorization and Cache List) will be
accepted and start the charging session when charge point is not connected to central system.
AuthorizationCacheEnabled – Charge point supports an Authorization Cache or not.
AuthorizeRemoteTxRequests – Whether a remote request to start a transaction in the form of a
RemoteStartTransaction.req message should be authorized beforehand like a local action to start a
transaction.
BlinkRepeat – Number of times to blink the charge point lighting when signaling. This value is not
changeable for our product.
ClockAlignedDataInterval – Size (in seconds) of the clock-aligned data interval. This is the size (in
seconds) of the set of evenly spaced aggregation intervals per day, starting at 00:00:00 (midnight).
ConnectionTimeOut – Interval until incipient charging session is automatically canceled due to failure of
EV user to insert the charging cable connector(s) into the appropriate connector(s).
GetConfigurationMaxKeys – Maximum number of requested configuration keys in a
GetConfiguration.req PDU.