User's Manual

User Manual Rev 1.11
Basic/Smart/Smart Plus/Intelligent Charger-32A
45
Clicking on the “Configuration” and then “OCPP Settings” link will bring up the following screen, since
the page is too long to display, please using scrollbar to check remaining pages.
On this page you can change the properties just for the charge point. Click the “Apply” button at the
right side of the property when the value is changed.
Remote Control Settings
Remote Control Type: The remote control mode accept by SC3+/IC3. Options are
APP: SC3+/IC3 can be remote controlled by mobile APP.
OCPP: SC3+/IC3 can be remote controlled by OCPP 1.6 protocol.
APP+OCPP: Both APP and OCPP are accepted by SC3+/IC3.
Service Settings