User's Manual

User Manual Rev 1.11
Basic/Smart/Smart Plus/Intelligent Charger-32A
42
Charging Connector Information
Number Of Connectors – Number of connectors of the charge point.
Connector Type* – Indicates type 1 or type 2 cable installed in the charge point.
Max Amperage Connector – The maximum charging current of the connector capability.
* A charge point may have multiple connectors installed. For our product, there is only one connector
on them.
3.9.2 Station settings
Clicking on the “Configuration” and then “Station Settings” link will bring up the following screen. Since
the page is too long to display, we separate it to 2 screens.
On this page you can change the properties of the charge point. Click the “Apply” button at the right
side of the property when the value is changed.
Warning Settings
Temperature Low – Value in Celsius at which the charge point will send a temperature low warning
message.
Temperature High – Value in Celsius at which the charge point will send a temperature high warning
message.