User's Manual

User Manual Rev 1.11
Basic/Smart/Smart Plus/Intelligent Charger-32A
41
Configuration
3.9.1 Factory settings
Clicking on the “Configuration” and then “Factory Settings” link will bring up the following screen:
Basic Information
Charge Point Vendor – The vendor’s name of the charge point.
Charge Point Model – The model’s name of the charge point.
Charge Point Serial Number – The unique serial number of the charge point.
Hardware Version – The hardware version of the charge point.
Firmware Version – The software version of the charge point.
Meter Type – The meter type of the charge point.
Reader Type – The reader type of the charge point. [Support only on SC3+/IC3]
DSMR Type – The DSMR type of the charge point.
Production Date – The production date of the charge point.