User's Manual

User Manual Rev 1.11
Basic/Smart/Smart Plus/Intelligent Charger-32A
18
Tools & parts required for installation
Table 3-1 Tools & parts required for installation
Tool
QTY
Model
Size
Supplier
Remark
Mounting Bracket
1
All
194x109x9 mm
Model Accessories
Fasten charge point to the
wall
Holster ASSY
1
All
58x58x70 mm
Model Accessories
Hold EV charging plug
Screw
4
All
Tapping: #12
Model Accessories
Fasten Mounting Bracket &
Hook
Mechanical: M6
Commercially Available
Wire, Copper
3
SC3+
/IC3
8 AWG
Commercially Available
UL1015 (recommended)
Heat Shrink Tube
3
SC3+
/IC3
For 8 AWG wire
Commercially Available
Protect wires & terminals
Terminal
3
SC3+
/IC3
For 8 AWG wire
Commercially Available
Connect input wires to the
terminal block
Conduit
1
SC3+
/IC3
1 inch
Commercially Available
Protect power cable
Torx Screwdriver
1
All
T20
Commercially Available
Philips Screwdriver
1
All
PH3
Commercially Available
Hexagon Socket
1
All
5/16
Commercially Available
Tighten #12 Tapping screws
Torque Wrench
1
All
35 kgf-cm min
Commercially Available
Install the SIM card (for IC3 only)
1. Disassemble top cover
1-1 Loosen the star screws (x5).