User's Manual

LITEMAX Electronics Inc. Page 30
6.1
OSD Function
MEMBRANE CONTROL BUTTOM
POWER SWITCH: Pushing the power switch will turn the monitor on. Pushing it again to
turn the monitor off.
Power LED: Power ON-Green / Power off-No.
Up Key >: Increase item number or value of the selected item.
Menu Key: Enter to the OSD adjustment menu. It also used for go back to previous menu for
sub-menu, and the change data don’t save to memory.
Down Key <: Decrease item number or item value when OSD is on.
Screen Adjustment Operation Procedure
1. Entering the screen adjustment
The setting switches are normally at stand-by. Push the Menu Key once to display the
main menu of the screen adjustment. The adjustable items will be displayed in the main
menu.
2. Entering the settings
Use the Down Key < and Up Key > buttons to select the desired setting icon and push the
SELECT button to enter sub-menu.
3. Change the settings
After the sub-menu appears, use the Down Key < and Up Key > buttons to change the
setting values.
4. Save
After finishing the adjustment, push the SELECT button to memorize the setting.
5. Return & Exit the main menu
Exit the screen adjustment; push the “MENU” button. When no operation is done
around 10 sec (default OSD timeout), it goes back to the stand-by mode and no
more switching is accepted except MENU to restart the setting.