Instructions / Assembly

4-Way wiring
Indicator Light
7. Turn on the power at the circuit breaker.
8. Test to see that the Smart Switch is functioning by pressing
the ON/OFF switch. Your load (lights) should turn ON/OFF
respectively.
Note: If your lights do not turn on, check that the live/load and
traveler wires are all connected according to the old switch.
Turn off power at the circuit breaker and check the wiring.
9. WiZ app setup – Refer to “WiZ Quick Setup Guide”
OFF
ON
OFF
ON
OFF
ON
OFF
ON
COLOR INDICATOR LIGHT
STATUS
SWITCH STATUS
WHITE
ON Switch is OFF
OFF Switch is ON
RED Flashing Quickly Pairing failed
WHITE
Single Blink Ready for Smart pairing mode
Double Blink Ready for Manual pairing mode
Neutral
Approved switch locations
Hot
3-Way 4-Way 3-Way
Mains