Instructions / Assembly

1. Turn OFF the power at the
circuit breaker and confi rm
with the voltage tester at the
switch before proceeding.
Place voltage tester against the
existing switch checking the
wall plate, screws and switch
at various points to determine
that there is no power present.
What you need
Installation
Piece of
electrical tape
Different color screw
(Black or Copper)
Screwdrivers
Pliers Wire Stripper Voltage Tester
2. Remove the wall plate and pull
out the existing light switch
so that all wires are exposed
outside of the electrical box (do
not disconnect wires).
OFF
ON
OFF
ON
OFF
ON
OFF
ON
3. Label the live wire with a piece
of electrical tape.