User Manual

ITEM NO.: LS-3896
ASSEMBLY INSTRUCTIONS:
1. CAREFULLY UNPACK ALL THE LAMP COMPONENTS. ASSEMBLE THE LAMP IN THE HORIZONTAL
POSITION ON A FLAT, CLEAN SURFACE.
2. USE THE SCREW (1) FOR SECURING THE CONNECTOR (2) TIGHTLY.
HOW TO REPLACE THE BURNED BULB OUT WHEN YOU USE THE LAMP
WAIT UNTIL LAMP IS COMPLETELY COOLED. LOOSEN THE RIVET (C) FROM THE PROTECTIVE
GLASS (B), AND TAKE THE GLASS (B) OFF, THEN TAKE THE BULB (A) OUT.
USE 35W x 1PC (MAXIMUM) JC TYPE BULB (BULB INCLUDED).
THIS UNIT COMES WITH A PROTECTIVE GLASS SHIELD WHICH PROVIDES ULTRAVIOLET RADIATION
PROTECTION. USER IS CAUTIONED TO REPLACE THESE PROTECTIVE SHIELDS AFTER EITHER
INSTALLATION OR REPLACEMENT OF TUNGSTEN HALGOEN LAMP.
IMPORTANT SAFETY INSTRUCTIONS:
THIS PORTABLE LAMP HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE OTHER) AS A FEATURE TO
REDUCE THE RISK OF ELECTRIC SHOCK . THIS PLUG WILL FIT IN A POLARIZED OUTLET ONLY ONE WAY.
IF THE PLUG DOES NOT FIT FULLY IN THE OUTLET, REVERSE THE PLUG. IF IT STILL DOES NOT FIT,
CONTACT A QUALIFIED ELECTRICIAN. NEVER USE WITH AN EXTENSION CORD UNLESS PLUG CAN BE FULLY
INSERTED. DO NOT ALTER THE PLUG.
※ PLEASE INFORM YOUR DEALER IMMEDIATELY IN CASE OF
ANY PARTS SHORTAGE.
※ SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.