PRODUCT SPECIFICATION Wi-Fi (11a/b/g/n/ac 2Tx2R)+BT (V4.
CONTENT DESCRIPTION ................................................................................................................................... 9 PRODUCT FEATURES .................................................................................................................... 9 PRODUCT SPECIFICATIONS ...................................................................................................... 10 MAIN CHIPSET ................................................................................
FCC Statement: Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
IMPORTANT NOTE: This module is intended for OEM integrator. The OEM integrator is responsible for the compliance to all the rules that apply to the product into which this certified RF module is integrated. Additional testing and certification may be necessary when multiple modules are used. 20 cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into.
maintain the required spacing to end user for RF Exposure compliance, as specified in this document. 3. If other radios are integrated inside the host with the LITE-ON Module, the OEM integrator will contact its test lab, TCB or LITE-ON to determine if additional FCC compliance evaluation is required to meet FCC collocation rules. 4.
potential for harmful interference to co-channel mobile satellite systems. les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux. The maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p.
IMPORTANT NOTE: IC Radiation Exposure Statement: This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body. Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé.
Group Ant . . 7 3 8 9 Project Brand P/N (Sparro w8 inch) Shenzhen South Star Technolog y Co., LTD N12-4142-R0A N12-4143-R0A 5 11 - INPAQ EAA65404601 EAA65404701 13 N2420SDAR-T6-G120U4LI ( Rev B ) - Airgain N2420DCB3-T10-G200U4L I ( Rev B ) N2410MST-T-G85U4LI ( Rev G ) 15 Group. Ant. Port 1 2 3 4 5 N/A PIFA N/A PIFA Mini i-Pex EAA65404602 12 14 PIFA N14-0595-R0A 10 4 Antenn Connecto a Type r Gain (dBi) 2.4G 5G BT 1 1 3.52 4.18 - 2 2 3.52 4.18 - 3 1 - - 3.
DESCRIPTION QCA9379-3 is a single-die wireless local area network(WLAN) and Bluetooth(BT) combo solution to support 2x2 MIMO with two spatial streams IEEE802.11 a/b/g/n/ac WLAN standards and BT 4.2+HS enabling seamless integration of WLAN/BT and Low Energy technology. PRODUCT FEATURES Bluetooth V4.2 LE system Backwards compatible with BT version of 1.1, 1.2, 2.0, 2.1, 3.0+HS and V4.
PRODUCT SPECIFICATIONS MAIN CHIPSET Qualcomm Atheros QCA9379-3 FUNCTIONAL SPECIFICATIONS BT Function Standard Bluetooth V4.2LE Bus Interface UART Data Rate 1 Mbps, 2Mbps and Up to 3.2Mbps Modulation Scheme GFSK, π/4-DQPSK and 8-DPSK Frequency Range 2.402~2.480 GHz Transmit Output Power +4 ≤ Output Power ≤ +10dBm; Class I Device Receiver Sensitivity < 0.1% BER at -94dBm Wi-Fi Function Standard IEEE802.11a; IEEE802.11b; IEEE 802.11g; IEEE 802.11n; IEEE802.11ac Bus Interface SDIO 3.
Network Architecture Infrastructure mode Operation Channel Frequency Range 2.4GHz 11: (Ch. 1-11) – United States 13: (Ch. 1-13) – Europe 14: (Ch. 1-14) – Japan 5GHz 21: USA 19: EU 8: Japan 802.11bg 2.400 ~ 2.4835 GHz 802.11a 5.15 ~ 5.85 GHz Transmit Output Power - single chain @ant; Tolerance: ±2dBm@2.4GHz; ±2.5dBm@5GHz 2.4GHz 802.11b Tgtpwr (dBm) 1Mbps 17 2Mbps 17 5.5Mbps 17 11Mbps 17 802.11g Tgtpwr (dBm) 6~24Mbps 16.5 36Mbps 16 48Mbps 15 54Mbps 13.5 802.11n HT20 Tgtpwr (dBm) 802.
(dBm) 802.11ac VHT80 Tgtpwr (dBm) MCS5 MCS6 MCS7 MCS8 MCS9 13 12 11 10 9 MCS0 MCS1 MCS2 MCS3 MCS4 13.5 MCS5 13.5 MCS6 13.5 MCS7 13 MCS8 13 MCS9 12 11 10 9 8 Receiver Sensitivity Frequency Band 2.4G 5G Security Rate Condition 1x1(1SS) 2x2(1SS) (dBm) (dBm) 11b-1M PER < 8% -95 -97 11b-11M PER < 8% -87 -87 11g-6M PER < 10% -90 -92 11g-54M PER < 10% -73 -75 11ac-VHT20MCS0 PER < 10% -89.5 -91.
RECOMMENDED OPERATION CONDITIONS Symbol VDD33 Parameter 3.3V Supply Voltage VDD33_SWREG_VIN Supply Voltage for internal PMU VDDIO_GPIO0 VDDIO_GPIO1 Voltage supply for all IO signals VDDIO_GPIO2 VDDIO_AO_IN 1.1V supply from internal 1.1V AVDD11 PMU Min Typ Max Units 3.14 3.3 3.46 V 3.14 3.3 3.46 V 1.71 1.8 1.89 3.14 3.3 3.46 1.05 1.1 1.2 PIN ASSIGMENT * The following signal type is defined: I: Input; O: Output; I/O: Input/Output; G: Ground Pin.
25 26 27 SDOI_DATA2 SDOI_DATA1 SDOI_DATA0 28 AVDD11 29 30 31 SDIO_CMD WLAN_EN# BT_EN# I 32 VDDIO_AO_IN I 33 BT_WAKEUP_HOST# O 34 Debug_UART_TXD O 35 Debug_UART_RXD I 36 VDD33_SWREG_VIN I 37 38 39 SWREG_GND SWREG_GND VDDIO_GPIO2 G G I 40 32.768KHz_IN I 41 AVDD11 I 42 43 44 45 46 GND GND GND GND VDD33 G G G G I 47 VDD33 I 48 GND G 49 AVDD11 I GND G 50~66 I/O I/O I/O O I/O I SDIO Data Line2 for WLAN SDIO Data Line1 for WLAN SDIO Data Line0 for WLAN Analog 1.
MECHANICAL FOOTPRINT Page 15/19
MODULE PINOUT Page 16/19
MHF4 CONNECTOR SPEC Page 17/19
POWER-UP SEQUENCE TIMING Page 18/19
EEPROM INFORMATION BT Vendor ID 0x0271 Product ID 0x0801 WI-FI Reg Domain TBD Vendor ID 0x0271 Product ID 0x0801 ENVIRONMENTAL OPERATING Operating Temperature: 0 to 50 C (32 to 122 F) Relative Humidity: 5-90% (non-condensing) STORAGE Temperature: -40 to 80 C (-40 to 176 F) Relative Humidity: 5-95% (non-condensing) Page 19/19
